1. HeatingForce
  2. Boilers Fixes

Boiler Fan Noise: Top 8 Fan Faults and Replacement Costs

This guide to boiler fan faults will explain how boiler fans work, and how to fix them when they malfunction.

In our research, we’ve identified the top 8 most common boiler fan faults and their repair and replacement costs. Read on to learn more!

Boiler fan noise
Constantly having problems with your old and tired boiler?
Get a fixed price for a new one on your screen here.

How a Boiler Fan Works

Firstly, a boiler fan doesn’t cool the components inside a boiler — it’s there to drive flue gases out of your home.

As fuel (gas, LPG, oil) burns in the combustion chamber, the process releases harmful gases. This is why each boiler requires a flue — a large white pipe that’s fitted to the boiler. You’ll either have a vertical flue (going through a roof) or a horizontal flue (going through a wall), and it’s this flue that takes harmful gases away from your property.

However, the flue can’t take expel gases on its own — it simply offers an escape route.

That’s where your boiler fan comes in. It creates a small draught that propels flue gases up and out of the flue.

Since it’s a critical safety feature, a boiler fan will always start up before any other boiler component.

The Printed Circuit Board (PCB) needs to recognise that the fan is running before it fires up the boiler. If it doesn’t know the fan is running, it will lock out and display a fault code related to an air fault, or fan problem. Examples might be the Vaillant F32, Baxi 160 and Worcester C6 & C6.

What kind of fuel does your boiler use?

Fixed price online with next day installation

Worcester boilers from as little as £1,965.

Common Boiler Fan Fault Codes

Depending on your boiler brand, you’ll see different fault codes indicating problems with the boiler fan. Here’s a list of fault codes showing fan issues from various manufacturers:

  • Worcester Bosch — C6, C6 215, C7 214,  C7 217, C1 264
  • Vaillant — F.32
  • Viessmann — 04, 05, 06, 08, 0A
  • Ideal — F3
  • Glow Worm — F2, F3
  • Potterton — E160, E161
  • Vokera — A03, 03, E030
  • Baxi — E160

If you’re seeing any of the error messages above on your boiler, chances are there’s a fan problem of some sort.

Boiler Fan Noise

If you hear your boiler making noises that resemble humming, the sound may be produced by the boiler fan’s faulty bearings. This is especially likely if you’re also getting one of the boiler fan faults listed above.

That said, there’s an array of other faults that may be responsible for a noisy boiler, so it’s always best to get a qualified professional to investigate the problem.

Top Boiler Fan Faults

There are 2 types of boiler fan faults to look out for:

  • Faults relating directly to the fan’s operation
  • Air faults, which hinder the fan’s operation

Let’s start with fan faults.

#1 – Fan Speed Too Low

A lot of homeowners have problems with their pilot light going out or the boiler locking out shortly after ignition.

We’ve been asked if wind can create a big enough draft to blow out the pilot light and cause this fault.

That’s usually not the case, unless the fan speed is too low.

The draught a fan creates into the flue should counter any draught trying to get into the flue (i.e. wind).

The Fix

Fingers crossed, this is a fan speed issue, not a faulty boiler fan. If this is the case, a Gas Safe engineer will be able to adjust the fan speed and reset the boiler.

#2 – Loose Wiring/Connections

Any noise stems from vibration. And this vibration (over years) can cause the connections and wiring to come loose.

As we’ve mentioned, the PCB needs a signal showing the fan is working before allowing the boiler to fire up or continue operating.

If loose wiring or connections block this signal from getting through to the PCB, the boiler will lock out.

The Fix

Get a Gas Safe engineer to inspect the fan for loose wiring and connections. They’ll need to be secured.

In fact, while the boiler casing is off, it’s worth asking the heating engineer to check all other connections. Fans are quite robust, so if your boiler fan is already worn out, it’s likely that other components suffer from similar wear-and-tear.

#3 – Damaged Wiring & Connections

Like loose connections, damaged wiring and connections cause signal issues.

Typically, we find that damage comes from boiler system leaks rather than old age. And unfortunately, boilers (and the central heating system in general) have plenty of parts that are prone to leaking.

It could be something as simple as a loose connection, blown pump seal, or in a more serious scenario – a cracked heat exchanger.

The Fix

First, you need to find a Gas Safe heating engineer or call the provider of your boiler cover to find and fix the leak.

Then, they’ll need to check whether the damage is limited to the fan.

If it is, replacing damaged wiring and connections will fix the problem and clear the boiler fault code, ready for a reset.

#4 – Faulty Unit

If your boiler is 5+ years old, there’s a small chance the boiler fan has failed completely.

Most manufacturers (Wilo, Grundfos, etc) will offer a service and repair kit for their fans.

However, there’s no point engaging in pricey boiler fan motor repair if the unit is already old — the “bandaid” fix won’t last long, and you’ll likely need a whole new unit anyway.

The Fix

Instead of wasting money on boiler fan motor repair, we’d suggest having a Gas Safe engineer replace the boiler’s fan altogether.

For old boilers that are out of warranty, a better option might be to get a price for a new boiler. You can get prices using this anonymous form from Heatable in less than 90 seconds (prices are displayed on screen).

Top Air Faults That Affect a Fan’s Operation

The fault code system on boilers isn’t particularly complex.

Air faults can often be confused with fan faults, and vice-versa.

So, before writing the fan off it’s worth considering the following problems.

#1 – Flue Blockage

A blockage in the flue means harmful gases can’t escape. 

The boiler notices an increase in air pressure (as the fan continuously pushes harmful gases up the flue, and they don’t escape), and will shut down.

This is rare. But, if this is the case, the cause could be:

  • A blockage in a vertical flue that doesn’t have a flue guard
  • A flue that has broken apart and is blocking itself

The Fix

If the flue is blocked because it lacks a flue guard, your engineer will inspect it, remove any debris, and fit a flue guard to prevent future blockages.

However, if the flue has broken a part and blocked itself, you’ll need to replace it altogether.

#2 – Condensate Blockage

Condensate pipes vent harmful vapours from your boiler.

Unfortunately, they are prone to freezing in winter. This causes a blockage and air pressure fluctuation, just as you’d get with a blocked flue.

The Fix

The condensate pipe needs to be thawed out, as it’s likely the vapours have frozen.

Once you’ve thawed out the pipe, you must insulate it using lagging. If you’re in a particularly cold part of the UK, ArmourFlex lagging will provide a bit more protection than traditional lagging.

#3 – Air Pressure Switch

We’ve mentioned before that the boiler needs to know the fan is running and that there’s no blockage before it fires up.

It’s the air pressure switch that monitors air pressure in the boiler and determines if it’s safe for the boiler to start and continue operating. When this air switch malfunctions, your boiler may not get the all-clear to start working.

The Fix

Assuming there’s no blockage or fault with your boiler fan, it’s likely the air pressure switch needs replacing.

#4 – Faulty PCB

If all other options have been exhausted, the PCB could be to blame.

This gives and receives signals to parts in the boiler, including the fan.

If the PCB isn’t working, it won’t receive the correct signals. So, it might think the boiler fan isn’t working, even when it is.

The Fix

The PCB can be tested using a multi-meter. Hopefully, it’s a simple case of loose connections.

However, if the PCB is faulty, you’ll have to replace it. A new PCB can cost more than £500, so at this point we’d usually advise investing in a brand new boiler with a long warranty.

Boiler Fan Replacement Costs

Boiler fan replacement costs vary for one simple reason; no two boiler fans are the same price.

For instance, a Worcester Junior 28I fan is less than £100. On the flip side, a fan for a Baxi Solo 3 is nearly £200.

As a guideline, expect to pay in the region of £225-275 including parts and installation.

And, if you’re fed up with your old boiler, we recommend Heatable. Tech keeps prices down, whilst speeding things up. That means you’ll find amazing deals on the top combi boiler models from Worcester Bosch, Viessmann, Ideal, and other reputable brands. You can fill out Heatable’s quick, anonymous questionnaire to get your range of fixed-pre boiler quotes.
Worcester Bosch Greenstar 4000

Boiler Fan Repair Costs

Due to the price of labour, boiler fan motor repair costs are similar to replacement costs.

For that reason, unless the fix is an incredibly quick and simple one, we’d be looking for a replacement fan that’s going to last, rather than a repair.

What’s Next?

Thanks for reading our 3-minute guide to boiler fans.

Have other problems with your boiler? Check out our boiler fault finding guide.

Are you experiencing other boiler fan problems? Please leave us a comment below and we’ll do our best to get back to you.

Avoid Expensive Breakdown Costs
Boiler Replacement Promise: If it's under 7 years old and we can’t repair it, we’ll replace it.
Try YourRepair. From £8/mo
All plans include: annual boiler service, all parts and labour, unlimited support and 24hr helpline.
  1. shah says:

    information provided is practical and very useful. thanks..

  2. Carl Shelley says:

    I had a boiler fan issue, fan pcb had burned out, so I replaced the whole fan unit, the boiler fired up and ran for about an two hours HW and CH, then it stopped, turns out the fan PCB had burnt out again.
    Is there any known issue causing this?

  3. Barry says:

    Have used many registered engineers giving them access to buildings and most can not explain faults or operations of a boiler your site is excellent

  4. Alan Hart says:

    Strong winds 25 mph+…causes lots of clicking noise from burner then lockout

  5. Miron says:

    Hi, thanks for sharing. My Vaillant shows error with the fan but the fan does work (rotating) and air is going out from the flue. any idea what can be?
    Thanks

  6. Kaye Williams says:

    Why won’t my ideal combi logic 30 boiler fan turn off after the electricity was turned off and then on again…just keeps running

  7. Joanna says:

    Hi, hope you can advise- when our boiler has become faulty, it started to heat radiators altogether with taps on any settings the plumber came and fixed that but he the boiler fan started to be on 24/7 and the burner comes on for few seconds every 10 min, its noisy especially in the evening in our open plan living room/ kitchen can’t hear TV, it never was like that- the plumber said there is nothing he can do – it’s old boiler- MAIN Combi 24HE, ser no. BML104550169AC.
    Kind regards

  8. M Brookes says:

    I have a Glow-worm Micron 40 FF Boiler its telling me I have a Simultaneous Light Sequence-Fan/APS Fault.
    I have put the control knob to 0 put power on at isolation switch, I turn the control knob clock wise the fan starts up then 10 seconds later the boiler fires up.
    The boiler runs for about 15 minutes then stops telling me the fault I mentioned above.
    Can anyone advise it would be really appreciated.

  9. R B says:

    I have an uncommon fault. My Ideal Logic Heat 12 boiler keeps starting, running and stopping again randomly throughout the day and night without any ignition and without any demand for heat (shows 0), in a similar behaviour to post ignition run-on mode. The central heating and hot water systems are running normally in response to the thermostats/timers with normal indications on the boiler. Therefore the usual continuous running culprit of zone valves seem to be an unlikely cause. There is no indication of frost protection when the boiler misbehaves and the thermostats are set to higher than the 5 degrees frost setting anyway. Both telephone calls to the Ideal engineers and a local callout engineer have failed to diagnose the fault. The local engineer mentioned that his multimeter showed 50 volts on a boiler terminal which he expected to show zero, but did not know how to trace the source. I would prefer not to have to call out an Ideal engineer at £289 for a one time call out, and local repairers may well also prove as helpful/costly as the one already stumped. any thoughts?

  10. Gerald Walsh says:

    Have a Potterton suprima 50 boiler. About one a month the boiler starts to make loud droning noises which stop once the boiler is turned off. Boiler is c.20 years old and changing the pcb makes no difference. Please tell me the fan is dying as i did buy a brand new one few months ago which was never fitted to the boiler. Is this a job i could do myself?

  11. Mark says:

    Excellent advise

Leave a comment

Your email address will not be published. Required fields are marked *